- Contact Person : Mr. Lee Oliver
- Company Name : SHINVA Medical Instrument Co., Ltd. (Shandong)
- Tel : 0086-533-3587720
- Fax : 0086-533-3587722
- Address : Shandong,Zibo,No. 7 Taimei Road, Zibo New & Hi-tech Zone, Shandong, P.R.CHINA
- Country/Region : China
- Zip : 255086
TMQ.CVK-2540B Pulse vacuum table top Autoclave
TMQ.CVK-2540B tabletop type autoclave
Major capability and characteristics :
Micro-computer control, touch-key.Process, temperature, time and pressure dynamic LCD displayed.There are equipped with instrument, instrument bags, dressing, rubber and liquid sterilization programs for customers choice.B-D test and vacuum test programs.Built-in imported vacuum pump capable of vacuuming thoroughly inside dressings and bags, also the dental handdriller under a vacuum condition of 0.09 Mpa by three times vacuum, thus a thorough sterilization and best steam saturation are guaranteed.Pulsant final vacuum drying system is equipped force cooling device, the drying result of instruments is good.Automatic electric safety gate lock early warning automatically, it will be automatic locked at the conditions of fault and power cut.The 0.2μm filter provides sterile air into the chamber preventing a recontamination.The equipped printer for recording information during performance.The buzzer alarms when a cycle is completed.
Safety devices:
Auto protection device against over temperatureThis system cuts off power automatically if the designed temperature is surpassed.The program will be stopped if water level lower than the low limit, alarm with sound and light.Door safety interlockThe door cannot be opened until there is no pressure in the chamber and power for heating cannot be switched on until the door is firmly closed.Safety valve of auto release against overpressureIt opens when the designed pressure is surpassed.Electronic circuits safety device: direct current control loop and has protection against overload and voltage surpassed, alternating current main loop has short-circuit protection device.
Main technical parameters:
Designed pressure: -0.1~0.26MpaRated working pressure: 0.22MpaUtmost degree of vacuum: -0.09MpaPrecision of pressure displayed: 0.1KpaSterilization temperature105~136Precision of temperature displayed: 0.1Temperature degree of uniformity: ≤±0.5Material of chamber: SUS 304 stainless steel
TMQ.CVK-2540B Pulse vacuum table top Autoclave